EMT Practice Test

1. Question Content...

---

Question1: An HPE 3PAR StoreServ customer with FC, SSD and NL, drives is facing extreme latency during peak business hours with an OLTP application. They have enabled tiering using all drive types.
What could be used to resolve the issue?

Question2: An HPE 3PAR StoreServ 9000 All-Flesh Array customer plans to deploy a secondary array 20 km away from their primary array to enable storage replication over a dark fibre. Their existing environment consists of one HPE Synergy Frame 12000, HPE SN6000B Fibre Channel Switches, HPE FlexFabric 5700 Switch Series, and HPE StoreOnce Systems.
Which HPE license is required to meet the customer's technical requirements?

Question3: You are planning a single-site Nimble solution with iSCSI connectivity. Two 10GbE SFP+ dual port NICS are included in the configuration. You designed an intelligent Resilient Framework (IRF) stack with HPE FlexFabric 5900CP switches.
Which statements is correct when discussing the IRF limits for this configuration?

Question4: You have just completed a performance analysis of an HPE 3PAR StoreServ 8400 disk array with different tiers at a customer's site. After reviewing the performance metrics, you determine that they should install a new tier of SSD drives.
Which actions should you recommend they take to fully optimize the array? (Choose two.)

Question5: A customer needs to add another HPE 3PAR StoreServ system and plans to use the federated storage approach.
Which advantages can the customer expect? (Choose two.)

Question6: What is the benefit of HPE Synergy? (Choose two.)

Question7: What can move data directly from a snapshot to backup storage independent of backup server software?

Question8: A customer currently has a CS1000H and wants to upgrade to a CS3000.
What must be considered before upgrading?

Question9: You need to add SSD drives to a production HPE 3PAR StoreServ array configured with Adaptive Flash Cache (AFC).
What do you need to consider?

Question10: A customer has a large deployment of HPE Synergy compute modules, HPE 3PAR StoreServ storage, and HPE StoreOnce systems in a single data center. They are concerned about the risk of data loss due to site disaster.
What is the reason to propose HPE CloudBank?

Question11: A customer wants to expand his cascaded B-series based SAN but is concerned about latencies within the SAN backend. You recommend changing the topology to a full mesh.
Which switch feature will ensure that the latencies in the backend are at the lowest possible level?

Question12: A customer is evaluating an HPE 3PAR StoreServ system in a proof-of-concept project. The customer wants to receive emails about important storage system events and alerts.
What feature do you need to configure?

Question13: Which statement describes HPE StoreVirtual Network RAID functionality?

Question14: Where does HPE 3PAR StoreServ Data-at-Rest Encryption occur?

Question15: Which statement is correct when discussing the RAID layout of an HPE Nimble CS3000 storage system?

Question16: Which value does a Nimble solution provide in addition to other HPE storage solutions?

Question17: A customer is planning to connect a new HPE 3PAR StoreServ system to its existing Synergy based composable infrastructure via direct-attach.
Which tool would be used to manage the storage?

Question18: A customer is concerned about media and transmission errors caused by any component in the I/O stack from the server host bus adapter (HBA) into the HPE 3PAR StoreServ ports.
Which feature will address the customer's concern?

Question19: A customer needs to store a large amount of unstructured data that must be queried quickly.
Which type of storage meets the customer's needs?

Question20: Which resource provides configurations for HPE tested and referenced configurations in a software- defined storage environment?

Question21: A customer needs to implement a new SAN fabric for their growing environment. The new SAN should provide a high performance and port-efficient network with many-to-many connectivity. Because of changing requirements and the possible acquisition of another company in the near feature, the customer cannot predict the I/O traffic pattern within the SAN. The customer is also concerned about availability.
Which type of SAN topology should you recommend?

Question22: A customer has an HPE 3PAR StoreServ 8200 with eight 3.84 TB SSD's configured with RAID5 7+1. They plan to add four more 3.84 TB SSD's.
What needs to be changed on the configuration once the new SSD's are installed?

Question23: A customer with several HPE 3PAR StoreServ arrays has reported latencies with newly updated applications. You have proposed changes to the AO configuration and need to provide high-resolution reports on how the change has affected the latencies.
What should you propose on delivering the service time and I/O workload information daily for you and the customer?

Question24: You are presenting the HPE StoreEver portfolio to a media agency.
What advantage is offered when using LTFS?

Question25: During a technology workshop, the customer asks about differences between converged and Fibre Channel switches.
What would be a benefit of using FlexFabric switches in a fibre channel storage environment?

Question26: Users are complaining about poor performance with their Data Warehouse application.
What is an effective solution to increase their performance at minimal cost?

Question27: DRAG DROP
Match the data access type in a SAN fabric to the correct description.
Select and Place:

Question28: A customer is concerned about the business risks of non-compliance for long-term data protection, retention, immutability, and encryption on petabytes of data consisting of millions of objects in a global namespace across multiple geographic locations.
Which products should you recommend to the customer to address their concern? (Choose two.)

Question29: Which storage sizing tool, designed for HPE 3PAR StoreServ, can be used to determine whether customers quality for the Get Thin Guarantee Program?

Question30: A customer asks for an integrated solution for their remote office with All-Flesh storage and ease of management. Application-aware replication to their main office is an important requirement.
Which HPE solution component should you discuss with the customer first?

Question31: A customer needs a backup solution for their virtualized environment. The backup solution must be agentless, hypervisor independent, and integrated with HPE storage solutions. The solution must support Nimble snapshot and replication management.
Which product meets the customer requirements?

Question32: A customer is interested in integrating their HPE 3PAR StoreServ arrays into their OneView environment to support automated volume provisioning.
What must you install to enable the integration?

Question33: How does the HPE StoreVirtual VSA storage platform scale performance and capacity?

Question34: A customer asks for a 50 TB disk-based backup solution with deduplication. They also need additional storage for test/dev purposes.
Which single HPE storage platform can you present to the customer that will meet both of their needs?

Question35: A customer has mission-critical applications that intermittently experience heavy disk I/O. The storage speed has the most impact on the application's performance. The customer does not want to dedicate SSD disks to these applications because additional performance is only needed periodically, and moving the volumes between tiers takes too long.
Which HPE StoreVirtual VSA feature can address this customer's challenge?